- HERE IS HOW YOU CAN TELL IF YOUR SPRINTER USES THE OLD VS NEW EXHAUST KIT
- MUST UNPLUG THE SCR CONTROLLER. The location of the adblue controller should be under the dash on the passenger side.
here are pictures of the controller placement:
- Picture #1
- Picture #2
- Picture #3
- Picture #4
- The NOx sensors and SCR (adblue) injector should be unplugged as well.
- Unplug DPF pressure and temperature (EGT) sensors too.
- IF YOUR CAR HAS A NO START MESSAGE, IT SHOULD BE CLEARED PRIOR TO SENDING IN THE ECM FOR PROGRAMMING. FAILURE TO DO SO WILL MEAN THE MESSAGE WILL REMAIN ON THE DASHBOARD AND CAN CAUSE COMPLICATIONS WITH THE TUNING.
Increase the performance, reliability and fuel economy of your Sprinter 3.0L by eliminating the restrictive Diesel Particulate Filter (DPF) and factory catalytic converters, thus allowing the exhaust to flow more freely. This can be a huge benefit for small and large business owners alike. Save on long term repair expenses while gaining immediate fuel economy, it's a win/win!
This package includes all the hardware you will need for a complete DPF delete. With this setup you should be aware that the straight pipe configuration has a severe drone while highway driving and is significantly louder than the factory setup. if you are looking for stock-like silence, we highly recommend one the Resonator option.
Unlike other products on the market, we took the time and effort required to utilize the stock mounting bracket on the engine block. Incorporating this into our design keeps as much weight as possible off of your turbo, ensuring that this product will not put added stress and wear on the turbo, because let's be honest, that's the last thing you need!
The DPF Delete downpipe is built to last with 304 grade stainless steel and the world's most reliable aftermarket flex pipe. Rest assured that all required sensors will be plugged back in where they belong in the new downpipe. Made from 304 stainless steel, you can be certain it will outlast any warranty out there, that's why ours is a lifetime warranty.
All of the hardware needed for installation is included.
Installation time will vary greatly based on experience, know-how and having the right tools and lift, so please take the following prediction with a grain of salt. This is simply a general idea of how long it could take in an ideal situation:
Around 3-4 hours.
What's in the box
DPF Delete Downpipe - for Sprinter 3.0L
DPF Delete Exhaust 3" Midpipe for Sprinter
Reducer Adapter - 3" Midpipe to Stock Exhaust
3" Exhaust Strap Clamp (3)
Better fuel economy - with proper tune
Longer turbo life (no more DPF)
304 stainless steel
3" OD 16 gauge tubing
Will fit the following North American spec vehicles with DPF (diesel particulate filter):
Mercedes Benz Sprinter 3.0L (2019+)
Freightliner Sprinter 3.0L (2018-2020)
Some products sold through www.tunemyeuro.com are sold for off-road use only.
All performance modifications and installations are at the customer's own risk. TuneMyEuro holds no implied or otherwise responsibility for mechanical, electrical, or other failure when using aftermarket performance products. Items sold for OFF-ROAD use only are illegal to use on public roads, in most states and provinces, even if your state does not do emissions testing in accordance with the Clean Air Act. These are intended for racing vehicles that may never be used on a public road.
By purchasing any aftermarket performance product, the customer affirms that they have read the Clean Air Act and take full responsibility for any use, or misuse of the product and agrees that TuneMyEuro holds no responsibility for any consequences, legal, or other, of such use or misuse.
We do NOT ship off-road-only items to New Jersey or California.