3.5mm Platinum Cured Silicone Vacuum Line (15ft Roll)

The hose is a quality product. I added the red hose as well to do a complete replacement. The only issue I had is that my X5 is not deleted so the supplied roll was about 18" to short to replace all the hoses. I ended having to order 1M of hose online to finish the job. This is also not enough if you are doing the motor mounts. This roll with the red hose will replace all items on a deleted car.

Great replacement for the stock braided hose. This should be enough tubing if your car is deleted; if it is not deleted, consider ordering more.

I did a ton of work on my '11 X5d and with only 78k, many of the factory lines were brittle. They tend to crack and the entire turbo actuation system is driven by vacuum. Replace the lines as you're troubleshooting issues, or if you've got the whole intake off. Cut the factory lines (watch Andrew's videos on youtube) length wise along the nipple and then carefully pull the old line off in a twisting motion. The factory lines get stuck on the ports, and you can break the port off an expensive part if you aren't careful when you take the old lines off. I like this line better than the cloth covered factory style lines. A little silicone spray makes them easy to put back on. Also make sure you get a splice kit!

Great quality. Used to replace the factory cloth covered vacuum hoses. Works great, no vacuum issues.

Great kit and high quality hose and directional video. I had perfect amount to replace everything except the hoses to engine mounts. Luckily they are in decent shape.

Super sturdy, and easy to work with. Great upgrade over the cloth covered vacuum line.

I'm really glad i ordered this worked great.

Way better than my baked crumbling factory vac hose