Complete BRM EGR cooler bypass kit
Made in Canada by BuzzKen
1 x Elbow joiner
1 x Blockoff plate (CR Style)
1 x Blockoff plate (ALH Style)
1 x EGR Metal Gasket (CR Style)
1 x EGR Metal Gasket (ALH Style)
Recommended Specialty Tools:
(2) Coolant Hose Clamp Pliers to prevent loss of coolant
1.) Put car in the air supported by jack stands
2.) Remove the passenger side axle
3.) Remove the downpipe from the turbo
4.) Remove the EGR cooler
5.) Patch the coolant lines together with supplied pipe fitting
6.) Install 1 block off plate on the turbo and 1 on the intake manifold
5 Reviews Hide Reviews Show Reviews
Just as the title states this kit was amazing quality. Don’t buy a cheap eBay kit with the plastic coolant 90 degree elbow the stock hose clamps will destroy that thing. I was able to use the stock clamps off the coolant lines. Kit was super easy to install and everything I needed was in the kit. Received in 3 days after ordering.
After installing the EGR delete kit and using the Flashzilla to retune my 06 Jetta the car runs great, has more power with no missing or hesitation and now getting 47 mpg.
Exactly what you need, all parts are high quality, and fit perfectly. I offroad my MK5 so i tuned the EGR out, but my turbo wasnt making boost properly, it was a bit laggy, but this fixed it. No more EGR worries. I had also taken off my intake manifold and cleaned it, now it shall stay clean, no more soot. MPG is the same.
Had an exhaust leak on the EGR itself through the shaft hole for the valve on the unit. Now with EGR gone the turbo sounds and runs better, mileage is up now that the drive pressure is corrected. USE PENETRATING OIL ON STUDS ON THE MANIFOLD! I didnt use enough on one and broken the stud in half, that is a fight you dont want.
This is the best option to keep the intake clean. My EGR cooler was away clogged. This is a must product.